Cart is empty
Terrier Locking Plate Clamps
Item: Terrier TSE / TS / STS Vertical Lifting Clamp - Capacity: 1,650 to 66,000 lbs
Application: Terrier lifting clamps are for the vertical lifting of and transporting of steel plates and structures.
Description: Each Terrier lifting clamp is equipped with a safety mechanism to better ensure that the clamp does not slip when lifting force is applied and when the load is being lowered. The clamp will lock in the closed position as well as the open position. Each lifting clamps has the lifting capacity clearly engraved on not only the jaw opening, but the body as well.
Quality Standard: All lifting clamps are tested up to 2 times the Safe Working Load (SWL). Terrier lifting Clamps are designed on a break factor of 5 times the Safe Working Load (SWL). Meets all standards and requirements: European Norm NEN 13155, Australian Norm 4991, American Norm ASME B30.20-2010 and European Machine Directive 2006/42/EC.
General Information: Each lifting clamp is suitable for the lifting and transporting of steel plates with a maximum hardness of 37 HrC (345 HB). Each clamp is suitable for atmospheric conditions, between -40 degrees Fahrenheit to 212 degrees Fahrenheit.
Country of Origin: Made in Holland
Warning: Never use the plate clamps with less than 10% of rated capacity. Lift only one plate at a time. Make sure that all plates are clean and free of oil and debris. Never overload and prevent jerking of loads.More
2. Put a check mark in any box in front of each table row to keep the row highlighted.
3. To compare multiple items, first check the item, then click “Add button” to add them to the compare list. Next: Click on “View compare list” to view the selected items side by side.