Loading...
» Click here to view all Toolwell Divisions «
Call Us Toll Free    or    Contact Us
1-800-277-6110

Terrier 0.5 TNMK Non Marking Vertical Lifting Clamp - Capacity 1,100 lbs - Large Jaw

$781.85

TLC0059


Buy Online, via Phone, or Purchase Order

Item: Terrier - 0.5 TNMK / STNMK - Non Marking Vertical Lifting Clamp - Large Jaw - Capacity: 1,100 lbs

Application: For the vertical lifting of and transporting of steel plates and structures where the clamp will come into contact with stainless steel, aluminum, copper, wood, or marble plates

Description: Equipped with a safety mechanism to better ensure that the clamp does not slip when lifting force is applied and when the load is being lowered - Locks in the closed position as well as the open position - Has the lifting capacity clearly engraved on the jaw opening and body as well - Feature two special synthetic non marking pads to help protect the material or load being lifted

Quality Standard: Tested up to 2 times the Safe Working Load (SWL) - Designed on a break factor of 5 times the Safe Working Load (SWL) - Meets all standards and requirements: European Norm NEN 13155, Australian Norm 4991, American Norm ASME B30.20-2010 and European Machine Directive 2006/42/EC

General Information: Suitable for the lifting and transporting of steel plates with a maximum hardness of 37 HrC (345 HB) - Suitable for atmospheric conditions between -40° (degrees) F to 212° (degrees) F

Country of Origin: Made in Holland

Includes: (1) one clamp

WARNING: Never use the plate clamps with less than 10% of rated capacity - Lift only one plate at a time - Make sure that all plates are clean and free of oil and debris - Never overload and prevent jerking of loads - Never exceed rated capacity!

Feature

0.5 STNMK

Capacities

1100

Dimensions

0.67 - 1.46
7.87
3.66

Additional Dimensions

2.56
17.72
9.45
1.89
1.89
3.15

Weight

14

Availability

5 - 7 days