Cart is empty
Item: Terrier - 2 TDH - Horizontal Thin Sheet Lifting Clamp - Capacity: 2,200 lbs
Application: For the horizontal lifting and transporting of thin steel sheets that deflect when they are being lifted
Description: Compact shape and relative light unit weight with a high lifting capacity - Lifting capacity clearly engraved on the jaw opening and the body - When using horizontal thin sheet plate clamps TDH, a minimum of (2) two clamps must be used at all times
Quality Standard: Tested up to 2 times the Safe Working Load (SWL) - Terrier lifting Clamps are designed on a break factor of 5 times the Safe Working Load (SWL) - Meets all standards and requirements: European Norm NEN 13155, Australian Norm 4991, American Norm ASME B30.20-2010 and European Machine Directive 2006/42/EC
General Information: Suitable for the lifting and transporting of steel plates with a maximum hardness of 37 HrC (345 HB) - Suitable for atmospheric conditions, between -40° (degrees) F to 212° (degrees) F
Country of Origin: Made in HollandIncludes: (1) one clamp
WARNING: Minimum of (2) two plate clamps must be used at all time - Never overload and prevent jerking of loads - Never exceed rated capacity!